Bnc-2120 user manual

All models of the Rosemount Level Switch (“level switch”) are covered in this manual. Level switch overview Features list Designed for use in process temperatures of –40 to °F (–40 to °C) Based on vibrating short fork technology, the level switch is suitable for many liquid applications. The BNC also provides a function generator, quadrature encoder, temperature reference, thermocouple connector, and LEDs for digital I/O signals. The BNC (for pin M Series and B Series) has BNC inputs for 16 single-ended analog input signals, analog output signals, and some digital I/O signals. BNC The BNC is not designed for any input voltages greater than Vpk/60 VDC, even if a user-installed voltage divider reduces the voltage to within the input range of the DAQ device. Input voltages greater than Vpk/60 VDC can damage the BNC, all devices connected to it, and the host computer. Overvoltage.

CMX Emerson / Compatible, 25 Pin Adapter, Single BNC Input / Dual Output Wired for Channel "A" Acceleration Input and Channel "B" PeakVue (Comparable to Emerson PN: AA) CMX Emerson Compatible, 25 Pin Adapter with 2 BNC Jacks Wired for 2 Channel Voltage Input. CMX Hi there, I am trying to run an analog trigger (falling edge) on a BNC breakout connected to a PXI module (X-series device). From what I have read in the Installation guide (pg 8), I should be able to use PFI 0/P (which I think is the BNC connector in the very top right hand corn. User Manual; GTL BNC Cable; Specifications: Channels - 2 ; Frequency Maximum - 20 Mhz; Frequency Minimum - 1 uHz ( Hz) Functions - Burst, Noise, Pulse, Ramp, Sine, Square, Sweep, Triangle ; Max Amplitude - Vpp @ 50 ohms 10 V; GW Instek rolls out the MFG series multi-channel function generator, which has up to 2 simultaneous.

BNC The BNC is not designed for any input voltages greater than Vpk/60 VDC, even if a user-installed voltage divider reduces the voltage to within the input range of the DAQ device. Input voltages greater than Vpk/60 VDC can damage the BNC, all devices connected to it, and the host computer. Overvoltage. The BNC simplifies the connection of analog signals, some digital signals, and two user-defined connections to the data acquisition device while maintaining the integrity of your measurements with a shielded enclosure. The BNC connects to the AO channels of the E Series or S Series device with the AO 0 and AO 1 BNC c onnectors. AO GND is the reference for these BNC connectors. Using the Function Generator The BNC has a function generator that produces sine or triangle waveforms and TTL-compatible square waveforms. Use the switch below.